 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Nurse, I need a scalpel! |
| Now comes the fun part. Have you ever tried to fit a square peg into a round hole. Being as careful as can be, we hooked up over $10,000 worth of automotive engineering onto our hoist and carefully slid it into its new home. Like everything that you build without the aid of robotics, things don’t always fit exactly. We were pretty lucky as most of the mounts and bolt holes fit perfectly and with a slight bit of elbow grease we were able to fit the last mount bolt in. |
| From left: Bill (Holding the hoist), Daryl (behind the hoist), Tasha, Tatiana, and Marcin |
| With the space frame not allowing for much manoeuvring room, sliding the engine and tranny combo into place took the whole team’s involvement |
| When all else fails, brute strength will fix it |
| What ever you do, don’t let go of the hoist |
 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |